Before starting the slurry sealer, you should be prepared to check the quality of the slurry sealer materials before construction. One of the most important points is to check whether the content of emulsified asphalt can meet the requirements of the specification, and the mixture should also meet the requirements. After confirming the measurement standards, check whether the road surface to be constructed should be dry, free of debris, water, flat, etc.

Carefully check whether the engine oil has reached a certain amount; whether the switches of various electrical buttons are reliable; whether there is enough water in the paver water tank; whether the bolts of various parts of the slurry sealer are tightened; the chain needs to be sprinkled with appropriate oil to ensure its lubrication; whether the conveyor belt is in the correct position; whether the hydraulic joint is connected, whether the hydraulic oil is within the normal use range; whether the water pump and asphalt pump are operating normally.
When starting the slurry sealer, start the diesel engine and put the paver box in the working position, and then adjust the paving thickness. Use water to wet the paver box. After starting the hydraulic motor and adjusting its steering, use clean diesel to spray the agitator and paving box to reduce adhesion. The slurry sealer presses the pedal of the main clutch, engages the handles of the three clutches, and accelerates to quickly open the emulsified asphalt emulsion and waterway, then slowly releases the main clutch pedal, and puts all the decorations of the whole machine into operation to stir out qualified slurry mixture.
Sinoroader is a company specializing in the production of various specifications of road emulsified asphalt and hot asphalt, slurry sealers, rubber asphalt sealers, intelligent spreaders, synchronous gravel sealers, stress absorption layers, emulsified asphalt, slurry seal lower seals, and slurry seal micro-surfacing meets all technical requirements in road construction projects.