In daily life, bitumen modification plant is often used by us. What is the reason for convenient energy saving when using it? Next, our staff will give you a brief introduction. I hope it will help you understand the product.

Before the construction of the asphalt mixing station, the top surface of the asphalt mixer construction range should be cleared, and the site elevation should be kept dry and flat to meet the design requirements. When the surface is too soft, the foundation should be reinforced to prevent the construction machinery from becoming unstable and ensure that the pile frame is vertical. The construction machinery entering the site should be checked to ensure that the machinery is in good condition, and assembled and tested. The verticality of the mixer should be ensured, and the deviation of the gantry guide and the mixing shaft from the verticality of the ground should not exceed 1.0%.

How to use a small asphalt mixer safely? The editor of the asphalt mixing station will introduce it.
1. The small asphalt mixer should be set in a flat position, and the front and rear axles should be padded with square wood to make the tires high and vacant to prevent them from moving when starting.
2. The small asphalt mixer should implement secondary leakage protection. After the power is turned on before work, it must be carefully checked. It can only be used after the empty car test run is qualified. During the test run, the mixing drum speed should be checked to see if it is appropriate. Under normal circumstances, the empty car speed is slightly faster than the heavy car (after loading) by 2-3 revolutions. If the difference is large, the ratio of the driving wheel to the transmission wheel should be adjusted.  

Due to the influence of various factors, asphalt mixing plants will inevitably have problems after a period of use. Due to lack of experience, they do not know how to deal with these problems. The editor summarizes some experience and skills in this regard for your reference.

First of all, the selection of the delivery pump in the asphalt mixing station must meet the requirements of the maximum asphalt pouring time, the highest height, and the maximum horizontal distance per unit time during construction. At the same time, there must be a certain technical and production capacity reserve, and the balanced production capacity is 1.2 to 1.5 times as the best. 

Normally, the working object of an asphalt mixing plant is asphalt, but if concrete is added to it, how should the equipment be controlled? Let me briefly explain to you how to control an asphalt mixing plant under special circumstances.