Asphalt mixing plant equipment will generate a lot of dust pollution during use. To reduce the amount of dust generated, we can first start with the improvement of asphalt mixing equipment. By improving the design of the whole machine, we can optimize the design accuracy of each sealing part of the machinery, and try to make the equipment fully sealed during the mixing process, so that the dust can be controlled in the mixing equipment. In addition, it is necessary to pay attention to the details of optimizing the operation of the equipment and pay attention to the control of dust overflow in every link.

One of the more common faults of the asphalt mixing plant is the failure of the cold material feeding device. Generally speaking, the failure of the cold material feeding device refers to the problem of the variable speed belt stopping. The main reason for this phenomenon is that there are too few raw materials in the cold material hopper, which makes the loader have too much impact on the belt when feeding, so the cold material feeding device will stop working due to overload. The solution to this problem is to ensure that the amount of raw materials in the memory in the feeding device is sufficient.

Asphalt mixing plant equipment encounters different problems, and the methods of handling and solving them are also different. For example, one of the common problems of asphalt mixing equipment is that parts are fatigued and damaged. At this time, the method that manufacturers need to do is to start from the production of parts.

The hydraulic reversing valve of asphalt mixing plants is generally not prone to failure, but occasionally there may be untimely phase change, gas leakage, electromagnetic induction pilot valve, etc., and the corresponding fault causes and treatment methods are naturally different.

When we choose a product, we always go around and compare prices. Here I will give you some tips on choosing an asphalt distributor. In the highway construction technical specifications, the quota for asphalt spreading is stipulated. The flow rate of the asphalt pump is different from its speed. For an asphalt distributor with a professional engine driving an asphalt pump, its speed and vehicle speed can be adjusted by the engine. Therefore, the close cooperation between the two and reasonable adjustments can achieve a good spreading effect.

As a professional manufacturer Sinoroader, we provide you with the permeable road type of emulsified asphalt, which is the main aggregate in the initial compaction, spraying the emulsion layer after dispersion, spraying the emulsion, and compacting the pavement structure step by step. It is suitable for secondary and secondary roads, and can also be used as a link layer of asphalt pavement or base.