Recently, it has been found that many people do not know much about the daily maintenance points of intelligent emulsified asphalt spreaders. If you also want to know what is going on, you can read this introduction below.
Intelligent emulsified asphalt spreaders are key equipment in the field of road maintenance. Their daily maintenance is crucial and can effectively extend the service life of the equipment and ensure construction efficiency and quality. The following introduces the daily maintenance points of intelligent emulsified asphalt spreaders from four aspects:
[I]. Lubrication and maintenance:
1. Lubricate the key components of the asphalt spreader, including the engine, transmission system, spray rod and nozzle, etc., to ensure their normal operation.
2. Perform maintenance according to the lubrication cycle and type of grease used specified by the manufacturer, usually every 250 hours.
3. Clean the lubrication points regularly to ensure effective coverage of the lubricating grease and reduce friction loss.

[II]. Cleaning and maintenance:
1. Thoroughly clean the asphalt spreader after each use, including cleaning the external surface, spray rod, nozzle, asphalt tank and other components.
2. Clean the inside of the asphalt tank regularly to prevent asphalt residue from causing blockage and corrosion.
3. Pay attention to cleaning and maintaining the vehicle's filters, including air filters, oil filters and hydraulic oil filters, to ensure that they are unobstructed.
[III]. Inspection and debugging:
1. Perform an inspection before each use, including checking the connection of the hydraulic system, electrical system, spray rod and nozzle.
2. Regularly check the spray rod and nozzle of the asphalt spreader to ensure that they are working properly and are not blocked or damaged.
3. Debug the spray angle and pressure of the spray rod and nozzle to ensure uniform spraying and thickness of the asphalt.
[IV]. Troubleshooting:
1. Establish a sound troubleshooting mechanism, conduct regular and comprehensive inspections of asphalt spreaders, and solve problems in a timely manner.
2. Record and analyze the faults of asphalt spreaders, find out the root causes of the problems and take effective measures to repair them.
3. Make good preparations for spare parts in case of emergency to avoid construction interruptions due to lack of parts.
The above daily maintenance measures can ensure the normal operation of the intelligent emulsified asphalt spreader, improve construction efficiency, reduce the failure rate, and ensure the smooth progress of road maintenance work.