The hanging stone chip spreader is a new product that our company innovated and improved based on the stone chip spreaders currently used on the market. After the machine was launched on the market, it has received excellent feedback from users.
The suspended gravel spreader is equipped with an operating console equipped with a controller on the left side of the box frame, a widening distribution plate and a rebound distribution plate under the box frame, and 10 to 25 gates on the upper gate shaft in the box frame. , there is a spreading roller in the lower part, a material door is set between the gate and the spreading roller, a gate assembly handle connected to the gate shaft and a material door handle connected to the material door are set on the outer side of the box frame, and there is also a door handle on the box frame. The power device is connected to the spreading roller through a transmission mechanism. The power device is a motor connected to the controller through a wire. The transmission mechanism is a sprocket chain transmission mechanism. The motor is connected to the spreading roller through a sprocket chain transmission mechanism. The gate is: The guide sleeve and the gate plate are set on the shaft sleeve. The guide sleeve is equipped with a positioning cone whose end is inserted into the shaft sleeve. The positioning cone is provided with a gate handle equipped with a spring. The upper end of the guide sleeve is provided with a pressure cap. It has the features of reasonable design and practicality It has the advantages of strong performance, low production cost and cheap sales price, so it can be widely used on dump trucks.

The stone chip spreader is used for surface treatment methods such as penetration layer, lower sealing layer, stone chip sealing layer, micro surfacing and other surface treatment methods and aggregates in pouring construction of asphalt pavement; it is used to spread stone powder, stone chips, coarse sand and gravel. Operation.
The stone chip spreader is a small mechanical, electrical and hydraulic integrated machine that can be installed on the back of various dump trucks. It has its own small power hydraulic station, which is compact in structure, easy to operate, easy to install and easy to use. After the operation is completed, the machine can be disassembled to quickly restore the original functions of the dump truck.
The maximum spreading width of the stone chip spreader is 3100 mm and the minimum is 200 mm. It has multiple arc-shaped gates that are opened and closed by electronically controlled cylinders. The corresponding gates can be opened at will according to the construction requirements to adjust the width and position of the stone chip spreading; use a The oil cylinder controls the height of the positioning rod and limits the maximum opening of each arc gate to adjust the thickness of the stone chip spreader layer.