Water is one of the raw materials of the modified bitumen storage tank, and it is distributed in various components of the modified bitumen storage tank equipment. According to the components where water is distributed, the anti-cold measures are explained one by one. The modified bitumen storage tank water tank, the water inside the water tank is released through the filter valve. Some instruments of the modified bitumen storage tank do not have a filter valve to save the cost of the equipment. The modified bitumen storage tank can only be drained by loosening the flange bolts at the bottom. The water pump of the modified bitumen storage tank here includes a hot water pump and a circulating water pump. This type of water pump for the modified bitumen storage tank generally uses a pipeline centrifugal pump. There is a sewage outlet at the bottom of the pipeline centrifugal pump. The modified bitumen storage tank pays attention to the sewage treatment of the sewage outlet at the bottom of the pump.

The modified bitumen storage tank emulsion tank generally uses a cone bottom. However, in order to better process the modified bitumen storage tank coefficient, the inlet and outlet are usually not placed at the bottom of the modified bitumen storage tank. Emulsion (mostly water) will remain at the bottom of the tank, and this part of the residual liquid in the modified bitumen storage tank must be discharged through the filter valve at the bottom. Emulsion pump for modified bitumen storage tank There are basically two types of emulsion pumps for modified bitumen storage tank equipment on the market, gear pumps or centrifugal water pumps. Gear pumps can only discharge the liquid inside the pump through the connection flange of the pipeline. The centrifugal water pump for modified bitumen storage tanks uses its own sewage outlet for sewage treatment.
The first four items of modified bitumen storage tanks with basic knowledge are basically drained, and the modified bitumen storage tanks will focus on the latter types. Modified bitumen storage tank colloid mill There will also be residual emulsion or water inside the modified bitumen storage tank colloid mill. The gap between the stator and rotor of the colloid mill is within 1mm. If there is a little residual water in the modified bitumen storage tank, it will cause the accident of freezing of the modified bitumen storage tank. The residue in the colloid mill can be treated by loosening the connection bolts of the finished product pipeline.
Heat exchanger, the heat exchanger in the modified bitumen storage tank equipment must be emptied of both hot and cold substances. The gate valve of the modified bitumen storage tank is the key. When draining water or emulsion pipelines, the ball valve of the modified bitumen storage tank must be in the open state. If there is water in the gate valve of the modified bitumen storage tank during operation or the vacuum pump is formed due to the closing of the gate valve, and the liquid in the pump and pipeline is not cleared, it will cause the modified bitumen storage tank to rupture.
Modified bitumen storage tank air pump, many modified bitumen storage tank equipment valve bodies use pneumatic type, and there will be an air pump component. The water content in the air, after the modified bitumen storage tank shrinks, will become water stored in the tank. To prevent cold in winter, these water must be released. Modified bitumen storage tank colloid mill cooling circulating water, many colloid mills use mechanical seals, so cooling circulating water will be used. This part of cooling circulating water must be released.
Other areas where water may be stored in the modified bitumen storage tank. The high-temperature thermal oil pipeline of the modified bitumen storage tank is not easy to condense in winter and does not need to be emptied. The bitumen in the modified bitumen storage tank will solidify in winter, but the volume is not easy to increase during the solidification process and does not need to be emptied.