In the application, the asphalt spreader has intelligent asphalt spreading rate and low investment, low power consumption, low cost, high thermal efficiency. The asphalt spreader can achieve the temperature required for construction in a short time. It is easy to use and move. It can be operated by one person. A single set of electric heaters is a bit expensive. In the production process of the asphalt spreader, water, as a production material, needs to be heated from room temperature to about 55°C. The evaporation heat of the asphalt spreader is transferred to the drainage. It was found that after the emulsified asphalt was produced for 5 tons, the asphalt spreader was accompanied by a significant increase in the temperature of the cooling circulating water. The production water uses cooling circulating water, and the water basically does not need to be heated. It can save 1/2 of the fuel simply from the energy.

The micro-powder machine used in asphalt spreader adopts an umbrella-shaped double-layer continuous shearing and grinding structure. At the same time, it has a shearing main micro-powder machine and a grinding main micro-powder machine. The asphalt spreader completes the one-time grinding of asphalt concrete, a large-scale process, and the grinding wheel is made of stainless steel. The micro-powder machine of the asphalt spreader has strong airtightness. The use of modified asphalt equipment should do a good job in environmental protection and energy saving.
The sustainable output of the asphalt spreader is the production process of the asphalt spreader, the output rate of the asphalt spreader, and the heating can be fast in a short time. The power of the supporting equipment is a bit expensive to make a single set. The heating shall not exceed 6KW. The waste index of the asphalt spreader during the use process has a certain standard, and the high index cannot be extremely high. The emission index of the asphalt spreader not only ensures that it does not exceed the required high index, but also far exceeds the environmental protection requirements.
The same is true for the use of asphalt spreaders. They heat up quickly, are energy-saving, have a large output, are not wasteful, are not aging, and are easy to operate. All the accessories of the asphalt spreader are on the tank, which is easy to move, hoist, inspect and put in order. It is very convenient to move. In order to smoothly use the asphalt spreader and achieve the desired effect, it is necessary to pay attention to the height of the railing when using it. The workbench adopts a vertical top and the car is vertical. In addition, we must also pay attention to the horizontal placement of the asphalt spreader on fire, which is cylindrical, three or four meters high, and is supported by iron frames on both sides. The asphalt spreader is about 20 centimeters above the ground, and the center is suspended in the air.