When using a thermal oil bitumen tank, it should be noted that the longer the bitumen is stored in the thermal oil bitumen tank, the more sediment will be produced by oxidation, and the more serious the impact will be on the quality of the bitumen. Therefore, when using a thermal oil asphalt tank, you must check the bottom of the tank once a year to determine whether the thermal oil asphalt tank needs cleaning. After half a year of use, you can test it. Once it is found that the antioxidants are reduced or there are impurities in the oil, you must add anti-oxidants in time, add liquid nitrogen to the expansion tank, or perform fine filtration of the thermal oil heating equipment. Hope that the majority of construction users Even if you know how to use it, you also need to know how to maintain the thermal oil bitumen tanks.

This is the first introduction to the relevant knowledge points about thermal oil bitumen tanks. I hope the above content can be helpful to you. Thank you for your viewing and support. If you don’t understand anything or want to consult, you can directly Contact our staff and we will serve you wholeheartedly.
If the thermal oil bitumen tank equipment is out of service for a long time, any liquid in the tank and pipes should be removed. Each hole cover should be tightly closed and kept clean, and all moving parts should be filled with lubricating oil. After each shift, the thermal oil asphalt tank should be cleaned. The thermal oil asphalt tank equipment without insulation facilities and anti-corrosion facilities should also be cleaned asphalt pumps, emulsifiers, aqueous solution pumps and pipelines. Routine maintenance of thermal oil asphalt tanks, transfer pumps, and other motors, mixers, and valves must be carried out in accordance with their factory instructions. The thermal oil asphalt tank should regularly check the matching gap between its stator and rotor. When the small gap specified by the machine cannot be reached, replacement of the stator and rotor should be considered. Regularly check whether the terminals in the electrical control cabinet of the thermal oil asphalt tank are loose, whether the wires are worn during shipment, and remove dust to avoid damage to the machine parts.
This is the first introduction to the relevant knowledge points about thermal oil asphalt tanks. I hope the above content can be helpful to you. Thank you for your viewing and support. If you don’t understand anything or want to consult, you can directly Contact our staff and we will serve you wholeheartedly.