Steps to replace the stator of the colloid mill:

1. Loosen the handle of the colloid mill, turn it counterclockwise, and start to swing slightly left and right on both sides after it moves to the slipping state and slowly lift it up.
2. Replace the rotor: After removing the stator disk, after seeing the rotor on the machine base, first loosen the blade on the rotor, use the tool to lift the rotor up, replace the new rotor, and then screw the blade back.
3. Replace the stator: Unscrew the three/four hexagonal screws on the stator disk, and pay attention to the small steel balls on the back at this time; after disassembling, the four hexagonal screws that fix the stator are screwed out one after another, and then take out the stator to replace the new stator, and install it back according to the disassembly steps.