When it comes to slurry sealing, everyone must be familiar with it. We all know that it is a cold-mix fine-grained asphalt concrete thin-layer construction technology using (modified) emulsified asphalt as the binding material. So everyone knows that it is used in construction. What are the effects afterward? If you don’t know, let’s follow the editor of Sinoroader Group to find out.

A brief introduction to the construction process of milling and planing the original road surface of the expressway is as follows:
1. First, according to the third pair of construction lanes and the oil spillage on the road within the width of the two marking lines, control the position, width, and depth of the milled micro-surface road surface (the depth is not higher than 0.6CM, which increases the friction coefficient of the road surface). The requirements for the second deputy are the same as above.
2. Prepare the milling machine to be positioned along one side of the starting point, adjust the position, and adjust the height of the discharge port according to the height of the dump truck compartment. The dump truck stops directly in front of the milling machine and waits to receive the milled material.

Cape seal is a composite surface wearing layer formed by laying an overlay on top of the synchronized gravel seal. In order to further improve road performance, fiber-synchronous gravel seals or fiber overlays can also be used for construction. The gravel seal bonding materials can be modified emulsified asphalt, rubber asphalt, SBS modified asphalt and other materials.

How to reduce the energy consumption of emulsified asphalt production equipment is a matter of concern to many users, and is also an issue that many manufacturers attach great importance to. Therefore, today, as a manufacturer of emulsified asphalt equipments, Sinoroader Group would like to take this opportunity to share with you how to reduce the energy consumption of emulsified asphalt production equipment. Methods of energy consumption of emulsified asphalt plants.

Fiber synchronous gravel sealing uses a synchronous gravel sealing truck to spread asphalt binder and aggregates of a single particle size on the road surface at the same time and then roll them with a rubber tire roller to fully adhere to the binder and aggregate to form protection. The anti-skid wearing layer and waterproof bonding layer of the original road surface. In order to let everyone understand it better, the editor of Sinoroader Group, a Cape seal construction manufacturer, will explain to you the characteristics of fiber synchronous gravel seal.

The dust parameters of the dust collector of the asphalt mixing station are very complex, so the performance requirements of the bag dust collector are very important. Let's first look at how to choose the bag dust collector of the asphalt concrete mixing station, and then we will study the determination of the dust bag.