The asphalt spreading quota q (L/㎡) varies with the construction object, and its range is as follows:
1. Penetration method spreading, 2.0~7.0 L/㎡
2. Surface treatment spreading, 0.75~2.5 L/㎡
3. Dust prevention spreading, 0.8~1.5 L/㎡
4. Bottom material bonding spreading, 10~15 L/㎡.

1. Loosen the handle of the colloid mill, turn it counterclockwise, and start to swing slightly left and right after it moves to the slipping state and slowly lift it up.
2. Replace the rotor: After removing the stator disk, when you see the rotor on the base, first loosen the blade on the rotor, lift the rotor up with the help of a tool, replace it with a new rotor, and then screw the blade back.
3. Replace the stator: Unscrew the three/four hexagonal screws on the stator disk, and pay attention to the small steel balls on the back at this time; after disassembling, unscrew the four hexagonal screws that fix the stator one by one,
and then take out the stator to replace the new stator, and install it back according to the disassembly steps.

Asphalt heating equipment is a product recognized by customers as worth buying. The quality of the brand that everyone trusts is also guaranteed by the manufacturer. Of course, asphalt heating equipment is now characterized by fast heating, energy saving, and high efficiency. In the process of use, as long as we choose the right material, we can maximize the use efficiency of asphalt heating equipment. So how to choose materials has become a key aspect that we need to understand.

During the operation of the asphalt mixing plant, the final construction quality of the mixing plant is determined. Therefore, efforts should be made to improve the quality level of the mixture, and the temperature of the mixture is one of the standards for mixture quality certification. In other words, if it can be turned into waste, it will cause mixed waste and cannot meet the requirements of use only.

Application characteristics of modified material emulsified asphalt equipment:

During the operation of the asphalt mixing plant, the final construction quality of the mixing plant. Therefore, we should try our best to improve the quality level of the mixture, and the temperature of the mixture is one of the criteria for the quality certification of the mixture. In other words, if it can become waste, it will cause mixed waste and cannot meet the requirements of the only use.