When purchasing an asphalt mixing plant, the manufacturer's technical staff made important reminders about the lubrication requirements of the equipment, including the lubrication of each component, which cannot be ignored. In this regard, users have also formulated strict standards to regulate them, as follows:

(1) The essence of the synchronous gravel seal is an ultra-thin asphalt gravel surface treatment layer bonded by a certain thickness of asphalt film (1~2mm). Its overall mechanical characteristics are flexible, which can increase the crack resistance of the pavement and heal the pavement. It can reduce cracks in the road surface, reduce reflective cracks on the road surface, improve the anti-seepage performance of the road surface, and maintain waterproof properties for a long time. It can be used for road maintenance to extend the service life of the road surface to more than 10 years. If polymer modified binder is used, the effect will be better.

Asphalt spreading trucks can be used for the construction of upper and lower seals, permeable layers, asphalt surface treatment, asphalt penetration pavement, fog seals and other projects on the road surface. They can also be used for the transportation of liquid asphalt or other heavy oil.

When using asphalt mixing plants, the regulations include things that must be done and things that are prohibited. No matter which aspect is closely related to the use effect of the equipment. The editor has listed some things that are not allowed for asphalt mixing plant, just keep them in mind.

Asphalt mixing plant is one of the most important equipment in processing operations, so how to build a website has become the focus of people's attention. The editor has compiled some key points, hoping to be helpful to everyone.

1. Before the construction of slurry sealing layer, various tests of raw materials must be carried out, and they can only be used after passing the inspection. Various tests of the mixture must be carried out before construction. Only when it is confirmed that the material has not changed can it be used. During construction, according to changes in the residual content of emulsified asphalt and the moisture content of the mineral material, the mix ratio must be adjusted in time to make it meet the specified requirements to ensure the workability of the slurry mixture and proceed with construction.