Asphalt mixing station reminds you of matters to be paid attention to after the trial operation and startup of the asphalt mixer
As long as the asphalt mixer is operated according to the specifications, the equipment can usually maintain good, stable and safe operation, but if it cannot be done, the safety of the asphalt mixer operation cannot be guaranteed. So how should we treat the asphalt mixer correctly in daily use?

First of all, the asphalt mixer should be set in a flat position, and the front and rear axles should be padded with square wood to raise the tires to avoid movement during startup and affecting the mixing effect. Under normal circumstances, the asphalt mixer, like other production machinery, must adopt secondary leakage protection, and can only be put into use after the trial operation is qualified.
Secondly, the trial operation of the asphalt mixer focuses on checking whether the mixing drum speed is appropriate. Generally, the empty vehicle speed is slightly faster than the speed after loading. If the difference between the two is not very large, the ratio of the driving wheel to the transmission wheel needs to be adjusted. It is also necessary to check whether the rotation direction of the mixing drum is consistent with the direction indicated by the arrow; whether the transmission clutch and brake are flexible and reliable, whether the wire rope is damaged, whether the track pulley is in good condition, whether there are obstacles around, and the lubrication of various parts. Heze Asphalt Mixing Station Manufacturer
Finally, after the asphalt mixer is turned on, it is necessary to always pay attention to whether its various components are operating normally; when it is stopped, it is also necessary to observe whether the mixer blades are bent, whether the screws are knocked off or loose. When the asphalt mixing is completed or it is expected to stop for more than 1 hour, in addition to draining the remaining material, the hopper needs to be cleaned. This is done to avoid asphalt accumulation in the hopper of the asphalt mixer. During the cleaning process, pay attention to the fact that there should be no water accumulation in the barrel to prevent the barrel and blades from rusting. At the same time, the dust outside the mixing barrel should be cleaned to keep the machine clean and intact.