High-quality asphalt mixing plants are not only enough to have high quality, but also have correct operating procedures to use it correctly. Let me explain the operating procedures of asphalt mixing plant to you.

All parts of the asphalt mixing station unit should be started gradually. After starting, the working conditions of each component and the indication conditions of each surface should be normal, and the pressure of oil, gas and water should meet the requirements before starting work. During the working process, personnel are prohibited from entering the storage area and under the lifting bucket. The mixer must not be stopped when it is fully loaded. When a fault or power outage occurs, the power supply should be cut off immediately, the switch box should be locked, the concrete in the mixing drum should be cleaned, and then the fault should be eliminated or the power supply should be restored. Before the mixer is shut down, it should be unloaded first, and then the switches and pipelines of each part should be closed in order. The cement in the spiral tube should be transported out completely, and no material should be left in the tube.