Bitumen (composition: asphaltene and resin) melter equipment needs to undergo certain tests. What are the key test methods for it? I don’t know how much we actually know. We need to understand the basic information before using it. Now Let me describe it in detail for everyone:

Bitumen (composition: asphaltene and resin) specimens are heated and filtered, a specified proportion of anti-stripping agent is added, and mixed by hand or with a mixing device to make the anti-stripping agent evenly dispersed in the bitumen specimen; carry out testing on the specimen The plastic film (thin, soft and transparent thick sheet) is heated and aged in a heating test, and the adhesion of bitumen and crude asphalt mixture is tested using the water step or water boiling method;
When necessary, we can use bitumen (composition: asphaltene and resin) blends that have not been heated and aged with a plastic film (thin, soft and transparent thick sheet) to conduct adhesion tests, or we can use cement concrete that has not been aged. Carry out horizontal stability (expression: firm and stable; no change) test and conduct ratio to determine the heat resistance and long-term use effect of the anti-stripping agent.
Carry out accelerated aging (short-term aging or long-term aging) treatment for hot mix asphalt (composition: asphaltene and resin) mixtures using anti-stripping agents; conduct water immersion Marshall tests and impulsive crusher tests of the mixtures to evaluate bitumen ( Ingredients: asphaltene and resin) The level of the mixture is stable (expression: firm and stable; no change).
The main test method of bitumen (composition: asphaltene and resin) melter equipment is this. We must carry out effective operations according to the instructions to fully demonstrate its characteristics. There are a lot of high-tech related to bitumen melter equipment. Yes, we will sort it out for you again. You are warmly welcome to check it out immediately.