The utility model is suitable for highway and highway construction and construction team maintenance, and is used as an supporting facility with asphalt drum mixing raw material equipment. It is suitable for construction sites under various conditions. It has high automation level, high thermal efficiency, environmental protection and energy saving, Environmental protection, heating, modified materials, dehydration and other characteristics. The bitumen heating tank storage tank is manufactured in strict accordance with the design standards of jt/j137-2005 "Highway Bitumen Roller Elimination Tank".

The automation technology for disassembly and assembly of gasoline and diesel bitumen barrels and heating boxes is high and can be switched between manual and fully automatic modes at will. Set the required high and low temperatures, automatically start or stop the burner, and set a temperature over-limit alarm; the mixing motor can only run when the set temperature is reached, preventing damage to the motor when the temperature of the bitumen stripper is too low. A separate heating cycle is adopted. The heating temperature of the high-temperature heat transfer oil is monitored by electric heating and temperature sensors. The starting and stopping of the circulating water pump is automatically stopped by the heating temperature control, and the bitumen stripper pump motor is turned on.
The temperature in the bitumen heating tanks must be designed and run so that the temperature of the underwater concrete can be reached, and the underwater concrete is transported to the next process; the export company of the bitumen debarking pump has a three-way plug valve that can be converted to internal circulation in the car, so that The bitumen in the tank is decanted and heated evenly, which improves the learning effect in management. Make sure that you set different stirring response temperatures, and the stirring motor is locked and eliminated. The mixing system is equipped with three layers of mixing fins, which can mix the bitumen at the bottom of the tank to remove the barrel, reduce sedimentation, and make the mixing time achieve the ideal effect for society.