With the development trend of scientific and technological innovation, the emergence of bitumen de-barreling equipment has brought great convenience to our work and has been widely used in every place. What difficulties must be paid attention to when feeding bitumen de-barreling equipment? The grinding wheel of the bitumen de-barreling equipment of the bitumen de-barreling equipment has no heating barrel clamp. Before use, try to add a small amount of diesel engine, let the bitumen de-barreling equipment circulate for 3~5 minutes, so that the body will generate heat. The temperature of the bitumen de-barreling equipment after operation is about 80~100 degrees. Open the stop valve on the oil pipeline, move it to open and close it, and discharge the whole body diesel engine.

The bitumen de-barreling equipment accelerates the aging, short-term aging or long-term aging treatment of the hot-mixed bitumen mixture using anti-stripping agent; the bitumen de-barreling equipment conducts the soaking Marshall test and the impact crusher test of the mixture to evaluate the stability of bitumen, bitumen and epoxy mixture of the bitumen de-barreling equipment.
When necessary, the bitumen de-barreling equipment can use bitumen that has not been filmed, thin and soft full-thick sheets of heated and aged bitumen, binder experiments to conduct adhesion tests, bitumen de-barreling equipment or use cement concrete that has not been aged to conduct water stability tests, and compare them. The bitumen de-barreling equipment can distinguish the heat resistance of the anti-stripping agent and the expected effect of long-term use.
The temperature of the grinding wheel of the bitumen de-barreling equipment is about 80~100 degrees. Only then can the materials be discharged for processing. If there is a heating barrel clamp, heat the grinding wheel before operation, and then discharge the materials for processing. When feeding and processing, open the metal cutting fluid stop valve of the bitumen de-barreling equipment first, and then open the bitumen stop valve to prevent the stator of the motor from biting. The upper part of the scale of the bitumen de-barreling equipment is generally adjusted to 0 during production, and the gap is adjusted to the right to expand. The change of a small grid on the scale is 0.01mm. The bitumen de-barreling equipment can be adjusted to the ideal gap at any time according to needs.