What system problems should be paid attention to during the operation of emulsified bitumen equipment?
Products
Application
Case
Customer Support
Blog
Your Position: Home > Blog > Industry Blog
What system problems should be paid attention to during the operation of emulsified bitumen equipment?
Release Time:2024-09-13
Read:
Share:
When using emulsified bitumen equipment, it should be noted that the longer the storage period of the bitumen in the emulsified bitumen equipment is, the greater the deposits caused by air oxidation, and the more serious the direct impact on the quality of the bitumen. Therefore, when using emulsified bitumen equipment, the bottom of the tank must be checked once a year to determine whether the emulsified bitumen equipment needs to be cleaned.
Seven characteristics of cationic emulsion bitumen_1Seven characteristics of cationic emulsion bitumen_2
1. The emulsified bitumen equipment can be inspected after one year of use. Once it is found that the antioxidant is reduced or the oil has dirt, it is necessary to add oxidizers in time, add liquid nitrogen to the expansion tank, or filter the high-temperature thermal oil heating equipment carefully. I hope that many construction customers will not only use but also maintain the emulsified bitumen equipment.
2. For our emulsified bitumen equipment, we will require customers to inspect it once every six months. Once it is found that the oxide is reduced or the oil and residue are increased, we need to add suspended oxides in time, add paraffin to the expansion tank, or filter the high-temperature thermal oil heating equipment carefully.
3. During the operation of the emulsified bitumen equipment, if there is a sudden power outage or circulation failure, you must not forget to replace the hot, cold, ventilated, and refrigerated boiling oil. Here is a reminder to everyone, it does not mean that the pressure valve is opened too much when changing the cold oil. During the replacement process, our pressure valve opening follows the principle of large to small, so as to minimize the replacement time, and at the same time ensure that there is enough cold oil to replace, and effectively prevent the emulsified bitumen equipment from being oil-free or low in oil.
The relevant knowledge points about the emulsified bitumen equipment are explained here. I hope the above information can help us. Thank you for your review and support. If you have any questions or need to consult, you can consult our staff immediately, and we will provide you with the service project with the best service.